Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Hewitt
A gate that won’t open is a security gap and an operational headache, and in Hewitt most of the failures we see trace back to one thing: posts shifting in clay soil. We’re gate specialists, not generalists. Every job we run is a gate job, so the technician who pulls up at your driveway knows the operator, the hinges, the control board, and the access hardware well enough to diagnose it without trial and error. We serve Hewitt homeowners and property managers from our base in Waco, and being close means we can read the specific conditions here better than a crew driving in from an hour away. Call (855) 638-3208. We answer 24/7. Fast dispatch from 7am to 7pm.
Why Hewitt Homeowners Call Gate Repair Waco for Gate Repair
Hewitt is a small, mostly residential Waco suburb, and the gate work here is dominated by driveway and backyard gates on suburban lots rather than commercial or ornamental estate gates. That shapes how we work. The bread-and-butter job in Hewitt is repairing a sagging wooden privacy-gate frame or re-hanging a vinyl or metal gate that’s lost plumb on its concrete pad. It’s not glamorous, but it’s where a specialist’s focus pays off.
We work across nine different gate systems, from consumer-grade Mighty Mule and Ghost Controls to commercial-grade FAAC, BFT, and DoorKing. That range matters in Hewitt because the housing stock here mixes older ranch-era homes with newer subdivision builds. One driveway off Hewitt Drive might have a worn 1980s cedar gate, and the next street over has a nearly-new builder-grade gate still carrying subdivision warranty expectations. We’re ready for either without a second call.
We’ve served the Waco area since 2018, and our reputation with Hewitt customers comes from showing up, diagnosing the actual cause, and giving you a written price before any work starts. If you’re managing an automated driveway gate or a multi-access entrance and the thing has stopped cooperating, that’s what we do. No HVAC, no roofing, no garage doors. Just gates.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Hewitt
Sliding Gate Repair in Hewitt usually starts with a gate that’s dragging on its track or creeping out of alignment, and the first thing we check is whether the post or the track has moved, not the operator. On Hewitt’s expansive clay soils, a slide gate’s support posts heave and pull out of plumb, which throws the whole carriage off and makes a healthy motor look like it’s failing. Repairing it means re-setting the posts, re-leveling the track, and re-aligning the carriage so the gate rolls clean and square again.
A sliding gate repair in Hewitt typically runs $250 to $600 for re-setting posts and re-aligning the carriage, with heavier-duty or wide-span gates at the higher end. The written estimate sets the final price, and it’s free.
Track and Roller Service
Worn rollers and a bowed track are the two most common causes of a slide gate that binds halfway through its run. We replace the rollers, true up the track, and test the full travel under load. If the track sits on a pad that’s cracked and settling, we say so plainly and price the fix rather than adjusting around it.
Operator Realignment
When a gate has been dragging for a while, the operator’s limit switches drift and the gate stops short or over-runs its end stops. We re-teach the operator’s travel after the mechanical fix is done, so the motor and the gate agree again. That’s part of the repair, not an extra.
Wrought Iron Gate Repair in Hewitt
Wrought Iron Gate Repair in Hewitt is often about rust, welds, and sag rather than appearance, though the two tend to go together once a gate has been binding for a season. Central Texas heat bakes and warps wooden gate frames, but on metal gates the same sun dries out hinges and latches and cycles the metal until welds crack and pickets pull loose. We re-weld broken joints, replace tired hinges, straighten bent frames, and treat rust before it eats through a post.
Wrought iron gate repair in Hewitt typically runs $200 to $500 depending on how much welding and hinge work is involved, and re-hanging a gate that’s lost plumb starts around $250. These are estimates; the written estimate sets the final price, and it’s free.
Welding and Rust Treatment
We re-weld cracked pickets and joints, then wire-brush and treat rust pockets so the repair holds through another summer. Left alone, rust creeps down into the hinge mount and the gate starts to sway.
Hinge and Latch Replacement
Dragging gates wear hinges fast, so a sagging metal gate usually needs new heavy-duty hinges and a latch that actually catches. We match the hardware to the gate’s weight, not to what’s cheapest on the shelf.
Trusted Brands We Service in Hewitt
We know the brands on your gate. LiftMaster logic boards, FAAC hydraulic arms, BFT operators, and Mighty Mule consumer systems all get the same trained attention, and we stock the local parts that keep repair turnaround short for Hewitt customers. When your operator is a brand a generalist has to look up, we’ve already seen the failure mode. That single-trade focus is why a broken Mighty Mule on a backyard gate or a commercial BFT arm on a shared entrance gets a real diagnosis instead of a guess. We’ll also tell you honestly whether a repair or a replacement makes more sense before you commit either way.
Common Gate Repair Problems We See in Hewitt Homes
- Clay-soil post heave. Hewitt’s expansive clay soils shift with the seasons and heave hinge posts, which makes gates drag on the concrete pad and throws operators out of alignment. The fix is usually re-setting the post in a fresh footing, not adjusting the hinges.
- Heat-warped wooden frames. Central Texas sun warps wooden gate frames until they stick and wear hinges and latches prematurely. Summer is peak season for swollen, sticking gates, and periodic heavy spring rains add to the movement.
- Shared fence-line posts. Gates along Hewitt’s subdivision fence lines often share a post with a neighbor’s fence, so a sagging double gate frequently means coordinating repair across the property line. We know how to handle that conversation.
- Builder-grade gates without proper entrapment protection. Newer subdivisions often have gates that lack proper UL 325 entrapment protection, which is a safety hazard. We check for it and can set it right.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Hewitt, TX
We price per job by written estimate, and the number you approve before any work starts is the number you pay. For a Hewitt market, a typical hinge, post, or realignment repair runs $200 to $600 depending on whether we’re re-setting a post or just re-hanging a gate. Sliding gate repairs with new rollers and track work land in the same range, and a heavier acreage gate with a solar opener can run higher because there’s more mechanical and electrical to sort out. What moves the price: post footing work in clay soil, the number of hinges or welds involved, and whether the operator needs re-teaching or replacing. The estimate is free, and we’ll tell you whether a repair or a replacement makes sense.
We Also Serve Cities Near Hewitt
We work the towns around Hewitt too. Woodway, Lorena, Waco, and McGregor are all within easy reach, and our gate repair crew handles the same driveway, acreage, and shared-entrance gates there. Long driveways, wide farm gates, and solar-powered operators are all part of the job.
Serving Hewitt, TX – Our Local Coverage Area
We serve Hewitt and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hewitt
Yes. A sagging double gate on a shared post is common in Hewitt’s older subdivisions, and we handle the cross-property coordination before touching anything. In almost every case the fix is re-setting the shared hinge post in a proper footing rather than just adjusting hinges, because clay-soil movement is what pushed it out of plumb. Call (855) 638-3208 for a free estimate.
Because the hinge is rarely the problem. In Hewitt, a gate that keeps sticking after a hinge adjustment usually has a post that’s heaved in the expansive clay soil, or a wooden frame that’s warped in the Central Texas heat. Adjusting hinges on a post that’s out of plumb just postpones the drag. The real fix is re-setting the post and re-hanging the gate square. Call (855) 638-3208 for an exact quote, and the estimate is free.
Yes. For acreage entrances off Hewitt Drive where trenching mains power to the street isn’t practical, a solar operator is often the right call, and we size the panel and battery to the gate’s weight and cycle count. We’ll also warn you up front that solar openers on shaded or heavy-use gates degrade faster in summer heat if the panel isn’t sited well. Installation is measured and scheduled, not same-day. Call (855) 638-3208 for a free measure and a written price.
Start with the obvious: confirm the breaker hasn’t tripped, check that the manual release hasn’t been knocked loose by wind, and look for a sensor or safety edge that’s been pushed out of alignment by debris or a shifted post. After heavy spring rains and clay-soil movement, an operator that seems dead often just lost a limit or a sensor. Leave the wiring itself to a technician. Call (855) 638-3208 and we’ll diagnose it properly. We answer 24/7.
Yes. Automated gates should have entrapment protection, and builder-grade gates in newer Hewitt subdivisions frequently lack it, which is a genuine safety hazard around children and pets. We check for proper UL 325 entrapment protection and can install or repair the safety edges and sensors as part of the job. Call (855) 638-3208 for a free estimate.
What a Hewitt Gate Job Usually Involves
Because so many Hewitt gates share a hinge post with a neighbor’s fence, a sagging double gate often needs cross-property coordination before any repair can be made, and the fix is almost always re-setting the post in clay soil rather than adjusting hinges. Our crew recently repaired a sagging wooden privacy gate in the Heartwood subdivision off Hewitt Drive. The gate had lost plumb because its hinge post had heaved in the expansive clay soil, so we pulled the old post, re-poured the footing, and re-hung the gate with new heavy-duty hinges. We also added a solar gate opener to the homeowner’s existing swing gate to avoid trenching power to the street. That mix – old cedar gates and near-new builder-grade gates in the same subdivision – is what the work here looks like, and it’s why we come out, look at the post, and price the real fix.
Call Gate Repair Waco for Your Hewitt Gate
A gate that’s dragging, sticking, or dead doesn’t fix itself, and in a small suburb like Hewitt the wrong fix just means a second call. Call (855) 638-3208 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll tell you whether a repair or a replacement makes sense before you decide, and the price is quoted and agreed before any work starts.
Written by Vernon Merrick, Owner at Gate Repair Waco, serving Hewitt since 2018.