Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Waco Homeowners Choose Ghost Controls Gate Repair
Gate Repair Waco provides independent Ghost Controls gate repair service across Waco, TX, covering solar and low-voltage swing operators, control boards, batteries, receivers, and the mechanical arm and limit hardware that ties it all together. What sets our Ghost Controls work apart is repetition: these are units we diagnose and repair every week in Central Texas, so we recognize the surge-fried board, the sagging battery bank, and the drifting limit switch without a trial-and-error visit. We’re an independent service provider. We are not affiliated with, authorized by, sponsored by, or warranty-backed by Ghost Controls. Call (855) 638-3208 for a free estimate, and we’ll tell you what it’s doing wrong.
Why Trust Gate Repair Waco for Your Ghost Controls Gate Repair?
We’re gate specialists, not generalists. Every job that comes through our shop is a gate job, and that single-trade focus builds diagnostic depth that companies splitting time across garage doors, roofing, or HVAC never get to. Ghost Controls equipment shows its own failure patterns, and we’ve learned them where it counts: at the post, in the heat, with a meter in hand. As an independent provider, we repair, install, and service Ghost Controls equipment using quality parts that fit. We use genuine Ghost Controls boards, arms, receivers, and batteries where the owner wants to keep the existing system intact, and proven aftermarket solar panels, batteries, and keypads where the OEM part is cost-prohibitive. We don’t stock parts or resell systems, so there’s no pressure to swap out what’s still working.
Vernon Merrick leads our team and brings the kind of background that shows up on the job. He grew up near the Bosque River bottoms west of Waco, picked up the electrical and electromechanical side of the trade at Texas State Technical College in Waco, and has spent decades working gates, operators, and access systems across Central Texas before starting Gate Repair Waco in 2018. His reputation has come from diagnosing what other technicians already guessed wrong on, especially on the control-board and power side. Every Ghost Controls job is worked warranty-safe: we document what we touched, use parts that meet the equipment’s requirements, and don’t cut or modify anything that would compromise the unit. Call (855) 638-3208. We answer 24/7.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in Waco
Ghost Controls is a solar- and low-voltage-driven swing gate operator line, which means most of its failures trace back to power, surge events, or the arm staying aligned with the gate through Waco’s heat and clay movement. Here are the failures we see most.
- Control board and receiver faults after lightning and grid surges. A near-strike or a rolling brownout can fry the board while leaving the mechanical arm intact. The classic symptom: the gate goes dead, or the remotes stop pairing even though the keypad still opens it. The receiver section of the board takes the hit first, which is why remote pairing fails while the keypad side of the same board survives.
- Battery and solar-charge failures. The operator runs fine on a fresh charge, then stalls or beeps after two cloudy days. Almost always the panel, the charge controller, or a worn battery bank is the culprit. Our hazy August afternoons and storm-heavy spring give solar operators a rough charge window; a marginal battery won’t recover, and the gate goes intermittent.
- Axial-arm and limit-switch misalignment. Waco’s blackland clay swells and cracks through wet-dry cycles, shifting post footings and pushing gates slightly out of plumb. When the arm binds mid-travel, or the gate reverses randomly, or it stops short of full open or close, the arm-to-gate geometry has drifted. The gate cycle is fighting the operator, not the other way around.
- Corroded battery terminals and water intrusion in the control box. Summer storms, driving rain off a hail squall, and drainage that runs clay runoff into the enclosure will find the seam. Once moisture reaches the terminals, resistance climbs, output drops, and the operator behaves erratically. Resealing the box and re-terminating is part of the repair, not an afterthought.
- Sagging gate hardware binding the arm. Waco’s long hot summers and clay-soil foundation movement push older gates out of true. A hinge that was fine last year can put the arm into bind this year. We fix the mechanical side of that equation so the operator isn’t asked to do work the gate hardware should be carrying.
Ghost Controls Parts & Our Repair-vs-Replace Approach
Parts choice drives whether a Ghost Controls repair holds. We use quality parts that fit the equipment: genuine Ghost Controls boards, arms, receivers, and batteries where you want to preserve the existing system, and proven aftermarket solar panels, batteries, and keypads where the OEM price is out of proportion to what the part does. We don’t claim to stock genuine parts or hold any dealer status, and we’re not authorized by Ghost Controls. We’re an independent shop that knows what fits and holds up.
Repair or replace is a real question, not a sales script. If the control board is fried and the operator itself is older with a corroded frame or a tired motor, chasing parts costs more than the unit is worth, and we tell owners so plainly. If the operator is sound and the fault is one component, repair is the honest answer. To get an exact quote, call (855) 638-3208. Estimates are free, and the price is set per job by the written estimate you agree to before any work starts. Battery backup, motor repair, and smart access work are all part of the scope.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We test the operator at the terminals: control board health, receiver pairing status, battery voltage under load, solar charge output, arm geometry and limit travel. This is electric gate diagnosis, not guesswork, and it tells us whether the fault is a board, a battery, a charge controller, or an arm out of alignment.
- 2
Repair or install. Once we know the fault, we lay out the options and the price in writing. Then we complete the repair, swap the part, or install a replacement operator if that’s the more sensible path.
- 3
Test. We cycle the gate through full open and close, verify both remotes and the keypad are paired and synced, confirm the arm runs clean with no bind, and check the solar system actually charges through the day.
- 4
Warranty-safe closeout. We document what we changed, reseal the enclosure where water intrusion was a factor, and stand behind the work so you have a record if anything comes up again.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in Waco
We work on Ghost Controls Heavy-Duty Dual Swing (TDS series) kits, the Single Swing axial-arm kits built on the AR1550 and AR900 platforms, solar-ready DC operators with battery backup, and tube-gate and driveway swing gate packages across both residential and commercial properties in Waco. That covers everything from the motor and control board to the receiver, keypad, and solar charging components. Call (855) 638-3208 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Service These Brands
Ghost Controls is one line among nine we work on. We also service LiftMaster, Mighty Mule, and DoorKing, along with FAAC, BFT, Linear, Viking, and Elite, covering residential driveway operators and commercial community entrances from the same crew. That breadth means if your property has a mix of brands, you don’t need a second call to find someone who knows each unit.
FAQs – Ghost Controls Gate Repair Service in Waco
No. We’re an independent Ghost Controls service provider. We’re not affiliated with, authorized by, sponsored by, or warranty-backed by Ghost Controls. We repair, install, and service Ghost Controls equipment using quality parts that fit, and we’re honest about that relationship. Call (855) 638-3208 for a free estimate.
Yes. We use genuine Ghost Controls boards, arms, receivers, and batteries where you want to keep the existing system intact, and proven aftermarket parts where the OEM price is out of proportion to what the part does. We don’t claim to stock genuine parts or hold dealer status. We use parts that fit, hold up, and keep the repair warranty-safe.
Most Ghost Controls repairs we handle are completed in a single visit once the fault is diagnosed. Board swaps, battery replacements, and arm realignment are typically straightforward. If the operator needs full replacement or an unusual part has to be sourced, we’ll tell you the timeline up front before anything is ordered. Call (855) 638-3208. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We cover Heavy-Duty Dual Swing (TDS series) operators, Single Swing axial-arm kits built on the AR1550 and AR900 platforms, solar-ready DC operators with battery backup, and tube-gate and driveway swing gate packages. That spans both residential and commercial swing gate systems. If you’re not sure which category your unit falls into, describe what it’s doing wrong when you call (855) 638-3208 and we’ll sort it out.
Not the way we work. We document everything we touch and keep repairs warranty-safe by using parts that meet the equipment’s requirements and not cutting or modifying hardware that would compromise the unit. As an independent provider, we can’t speak for Ghost Controls’s warranty terms, so if a specific term matters to you, we’ll walk through the work and you can review it against your own coverage. Call (855) 638-3208 for a free estimate.
Every Ghost Controls repair is priced per job by a written estimate you agree to before any work starts, so there’s no surprise on the invoice. Ghost Controls failures fall into a handful of categories (board and receiver faults, battery and solar-charge failures, axial-arm misalignment, corrosion, and hardware bind), and the estimate reflects which one you have. To get the number, call (855) 638-3208. Estimates are free.
That’s the classic axial-arm and limit-switch symptom. The gate opens about a foot, then reverses because the arm is in bind or the limit switch is reading the wrong position, usually after the gate has shifted slightly on its posts. Waco’s clay soil pushes gates out of true through the wet-dry cycle, so the geometry drifts. Call (855) 638-3208 and we’ll diagnose it in a single visit.
Your receiver took a surge, not the whole board. When remotes lose pairing but the keypad still drives the gate, the receiver section of the board is the failure, and the rest of the board is still doing its job. This is a very common post-storm pattern in Central Texas. Call (855) 638-3208 to get it diagnosed and repaired.
A healthy solar operator handles a Waco summer if the panel, charge controller, and battery bank are all working. The trouble starts when one marginal piece drags the rest down: a worn battery won’t hold a charge through hazy August afternoons, and a storm-heavy spring eats the charge window. That’s why battery backup is part of our Ghost Controls scope. Call (855) 638-3208 for an on-site diagnosis.
Yes. Smart access hardware like phone entry and card readers is part of the automated gate work we do, and it can often be tied into an existing Ghost Controls swing gate. We’ll review what you need to access-control and confirm compatibility on-site before quoting. Call (855) 638-3208 for a free estimate.
It depends on the operator’s age and condition. A surge-fried board on an otherwise sound operator is usually a repair: swap the board and move on. If the board is fried and the frame is corroded or the motor tired, replacement is the better use of money, and we’ll say so plainly. Call (855) 638-3208 for a free estimate, and we’ll give you a straight answer on repair versus replace.
Book Your Ghost Controls Service in Waco, TX
If your Ghost Controls operator is opening partway and reversing, beeping after cloudy days, or dead after a storm, we know that system. Tell us what it’s doing wrong, and we’ll tell you what it takes to fix it. Call (855) 638-3208. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is agreed before any work starts. Book your Ghost Controls service in Waco with our team.
Written by Vernon Merrick, Owner at Gate Repair Waco, serving Waco since 2018.