Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Woodway, TX
If you’re putting up a new gate on a Woodway property, the job looks different from a typical city install. Lots here are oversized, driveways run long, and many entries sit on bluff-side ground above the Bosque and Lake Waco where grade changes and long power runs from the house to the gate column are normal. That shapes everything: footing depth, hinge load, where the operator sits, and how the control wire gets there. We’re a gate-only company, so the technician who shows up works on gates and nothing else. For a free estimate on a new gate or a replacement operator, call (855) 638-3208.
Why Woodway Homes Are Different
Woodway’s housing stock runs mostly to large custom homes built from the 1970s through the 2000s on big lots, plus a newer wave of gated estate and luxury builds. That means you’ll see ornamental iron and privacy gates mounted in brick or stone pillars at the end of long driveways far more often than the short urban approaches you find closer into Waco.
The ground is the other factor. Central Texas expansive clay swells and shrinks with the seasons, and occasional hard freezes work on it too. Posts heave and settle, and a gate that closed squarely a year ago can start dragging or missing the latch because the ground under one column moved an inch. Add summer heat that cycles operators and hinges hard, and you get the recurring service calls we see across Woodway.
The bluff-side lots have their own pattern. When a gate operator and its control wiring sit far from the house with little shade, summer heat and voltage drop on a long power run turn into repeat visits. That’s terrain and distance, not a brand problem. Before any new install, check with the city on permit requirements and confirm any HOA rules on gate height, materials and setbacks, since Woodway properties vary widely in what’s allowed.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Woodway Services
Two jobs bring most Woodway homeowners and property managers to the phone: fixing a gate that’s already there, and fixing the operator that moves it.
Gate Repair in Woodway
Manual and mechanical repairs cover the gate itself: sagging hinges, a leaf that drags on the driveway, a latch that no longer lines up, bent frames and pillar-mounted iron that has shifted with the clay. On Woodway’s long, heavy ornamental gates, hinge and post movement is the usual culprit, and the fix starts with checking the footing and the pillar rather than bending the gate back by hand. We diagnose the cause, then repair what actually failed. For a gate that won’t close or latch, start with gate repair in Woodway.
Electric Gate Repair in Woodway
Automated gates fail at the motor, the control board, the safety sensors or the access hardware, and the trick is knowing which layer is at fault before you replace parts. On Woodway’s hilltop lots, long control runs and heat exposure make low-voltage and board faults more common than they look. We service LiftMaster and FAAC operators here regularly, along with the rest of the nine brands we cover, and we diagnose before we quote a fix. That’s electric gate repair in Woodway, handled by gate specialists.
Gate Installation in Woodway
Gate installation in Woodway starts with the ground, not the gate. Most driveways here run long, many entries sit on sloped bluff-side lots, and the operator often ends up far from the house with limited shade. We plan for that up front: proper footing depth for the clay, a power and control run sized for the distance, and an operator matched to the gate’s weight and daily cycle count. Whether it’s a new entry or a replacement of a worn-out system, we measure first and put the price in writing through Gate Installation before anything is ordered or dug.
Driveway Gate Installation
Signs you need it
You’re building a new entry, the old gate has rusted or sagged past repair, or the driveway layout changed and the existing gate no longer fits the opening.
What it costs in Woodway
Driveway gate installation typically runs from a few thousand dollars for a basic single-leaf setup into five figures for a wide double gate with automation, depending on span, material and operator.
How we do it
We measure the opening, check grade and soil, set the pillars and posts to proper footing depth, hang the gate, then run power and control to the operator and test the full cycle.
Automatic Gate Installation
Signs you need it
The gate is manual and hard to open from the car, or the existing operator has reached the end of its life and repairs no longer hold.
What it costs in Woodway
Automating an existing gate typically runs from roughly $1,500 to $5,000 installed, while a full new automated gate and operator package can reach $8,000 or more on larger estate entries.
How we do it
We confirm the gate swings or slides freely first, then match an operator to its weight and cycle count, mount it, wire the controls and safety edges, and set the travel limits and force.
What Gate Installation Costs in Woodway
These are typical ranges for the Woodway market, not fixed prices. The written estimate after we measure your opening is what sets the final number.
| Item | Typical range in Woodway |
|---|---|
| Driveway gate, single leaf | $3,500 – $8,000 |
| Automatic gate operator, installed | $1,500 – $5,000 |
| Full automated gate and operator package | $8,000 – $20,000+ |
Can you install a gate on a sloped bluff-side driveway in Woodway?
Yes. Sloped lots are common here, and we set posts to proper footing depth and match the operator to the grade before ordering anything. We measure on site and put the price in writing first.
Do you handle the power run and the safety edges on a new gate?
Yes. On long Woodway driveways the power and control run matters as much as the gate. We plan the run, wire the operator and controls, and install safety edges so the gate stops if something is in the way.
Brands We Service in Woodway
We work on your brand across nine gate systems, from consumer units like Mighty Mule and Ghost Controls to commercial-grade LiftMaster, FAAC and BFT operators, and we stock common replacement parts so most repairs don’t wait on a special order. We’re independent and experienced with each brand. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Woodway, TX
Here’s what the main jobs run in the Woodway market. These are typical ranges; the written estimate after we look at your gate sets the final price, and you approve it before any work starts.
| Service | Typical range in Woodway |
|---|---|
| Gate repair, manual or mechanical | $150 – $600 |
| Electric gate repair, motor or board | $250 – $900 |
| Safety sensor or access hardware repair | $150 – $450 |
| Driveway gate, single leaf, installed | $3,500 – $8,000 |
| Automatic gate operator, installed | $1,500 – $5,000 |
| Full automated gate and operator package | $8,000 – $20,000+ |
In Woodway, price climbs with gate span and weight, whether the ground needs extra footing work in the clay, and how long the power and control run is from the house to the gate column. A wide ornamental iron double gate on a hilltop lot simply costs more than a single leaf near the house. Every job here is quoted up front and agreed before we start, so the invoice matches the estimate.
Neighborhoods We Serve in Woodway
We cover Woodway from the bluff-side estates above the Bosque and Lake Waco to the established custom-home streets off the main corridors, and the ZIP code 76712 sits across much of it. Long driveways and pillar-mounted gates are common throughout, so expect us to check footing and grade, not just the operator. Dispatch runs from 7am to 7pm, Sunday through Friday, and we book each job into the next opening.
- Bluff-side lots above Lake Waco and the Bosque
- Established custom-home streets off Woodway Drive
- Gated estate builds on oversized lots
- Pillar-mounted ornamental iron entries
- Privacy gate properties on long driveways
Service Area – Cities Near Woodway
Woodway sits right against Waco, so our coverage flows naturally into Waco, TX and out to Hewitt, TX to the south. We also serve Lorena, TX and McGregor, TX for gate repair, electric gate repair and new installations. If you’re just outside these lines, call and we’ll confirm whether your address is in range. Gate Repair Waco handles the whole area from our home base in Waco.
Serving Woodway, TX – Our Local Coverage Area
We serve Woodway and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Woodway
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, with same-day service when the schedule allows. Woodway is minutes from Waco, so response is quick. Call (855) 638-3208 to book the next opening.
Often yes on both counts. Check with the city on permit requirements and confirm any HOA rules on height, materials and setbacks before ordering. We’ll tell you what the install involves so you can ask the right questions.
Yes. We serve Woodway across ZIP 76712, including bluff-side estates and the established custom-home streets, plus nearby Waco, Hewitt, Lorena and McGregor. Call (855) 638-3208 for a free estimate and we’ll confirm coverage for your address.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Woodway Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Heather Sutton"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Bryce Pruitt"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Megan Brooks